Videos / Movies ROHR2 - SINETZ - PROBAD

 

Example
Video and Download

Discription

Example 01

Download Project Data

Introducing ROHR2 pipe stress analysis
This tutorial shows how to:

  • create a new ROHR2 model
  • enter the isometric
  • enter valves and flanges
  • define supports
  • define operation conditions
  • run the model

Example 03

Download Project Data

This tutorial shows how to:

  • create a wind load case
  • apply the wind load
  • look at the results

Example 04

Download Project Data

This tutorial shows how to:

  • create a static equivalent earthquake case
  • apply the accelerations
  • look at the results

Example 05

Download Project Data

This tutorial shows how to:

  • specify support descriptions
  • create a system with 3 load case Operations
  • apply anchor point movements
  • look at the results

Example 06

Download Project Data

This tutorial shows how to:

  • add secondary steel to a piping model
  • look at the results
  • enter support stiffness

Example 07

Download Project Data

This tutorial shows how to:

  • apply a stratification (linear temperatur gradient across the pipe diameter) to a pipe

Example 08

Download Project Data

This tutorial shows how to:
- create a static equivalent fluid hammer load case
- apply the static fluid hammer loads
- look at the results
- optimize the system with rigid support
- insert and dimension a snubber

Example 09

Download Project Data

This tutorial shows how to:

-Create a load case settlement
-Apply settlement to supports

Example 10

Download Project Data

This tutorial shows how to:
- create a static earthquake load case
- create a dynamic earthquake load case (modal response)
- define and apply earthquake spectra combination
- compare the results

Example 11

Download Project Data

This tutorial shows how to :
- create a load case Pressure Test
- apply test conditions
- block all hangers
- selectively block some hangers

Example 12

Download Project Data

This tutorial shows how to simplify a system with many copies of the same structure using an external flexibility matrix

Example 13

Download Project Data

This tutorial illustrates ratcheting effects due to friction. It will show you how to create a load case follow up to simulate sucessive heating and cooling cycles.

The tutorial is split into 3 parts:
Part 1: Standard pipeline calculation
Part 2: Calculation with additonal start-up and shutdown load cases
Part 3: Calculation with additional load case follow up.