EN-/DIN material databases (FEZEN)

The material database FEZEN provides material properties for metallic materials for standardized materials acc. DIN- and EN-Material-Codes/Standards:

  • Approximately 1.500 sheets containing material reference data basing on standard data of the EN material codes. Material data deviating from the above standards (revaluation or devaluation) are taken into account in line with EN 12952, EN 13480, EN 13445 and the AD-2000 and TRD codes.
  • Approximately 700 material sheets with materials reference data based mainly on standard data of the DIN codes, but also on data of VdTÜV or SEW sheets. Material data deviating from the above standards (revaluation or devaluation) is considered following AD-2000 and TRD codes.

The EN-/DIN-database is used by the PROBAD-EN modules EN 12952, EN 13480, EN 13445, EN 1591, EN-DIN-pipe series, national codes calculation modules AD-2000 and TRD, as well as  modules WRC 107, WRC 297 for the internal determination of relevant material values. That´s why it is recommended to order a license of the EN-/DIN database together with the calculation modules.
Additionally a comparison of the new European material names according to EN 10027 and the old designations according to DIN 17006 and 17007 is available.
The material database FEZEN is revised permanently by SIGMA. Annual updates provide the latest strength values.

 

FEZEN information system for EN and DIN materials

The PROBAD module "FEZEN information system" provides the interactive use of the material databases for EN- and DIN-materials and is even working independent of PROBAD calculation modules. The program is used to recall material properties (individually or in total) and to print material sheets.

This module analyzes and shows characteristic values (tensile strength, yield strength or proof stress values, creep strength values etc.) as well as the components physical properties, allowable stresses, allowable temperatures and life cycle parameters

ASME- Material database

The PROBAD modules basing on ASME-Codes (ASME Sect. I, ASME B31.1, ASME B31.3, ASME Sect. VIII.) is connected to an ASME material database containing approximately 300 SA steels. Either the allowable stresses or stress values can be defined for a material on the input panels.
The ASME material database is revised permanently by SIGMA. Annual updates provide the latest strength values.

DLL-Interface solutions for the material databases EN, DIN and ASMEn EN, DIN und ASME

The material databases of EN- DIN- and ASME-materials can be integrated by an interface program in form of a DLL (dynamic link library) by customer‘s specific programs and allows the evaluated material data.